您的购物车目前是空的！
标签： USRP
-
UBX 10-6000 MHz Rx/Tx (40 MHz, N Series and X Series)
783774-01 | UBX 40 USRP Daughterboard (10 MHz – 6 GHz, 40 MHz BW) $ 1,926.00 USD
The UBX 40 daughterboard is a full-duplex wideband transceiver that covers frequencies from 10 MHz to 6 GHz with 40 MHz of instantaneous bandwidth. Coherent and phase-aligned operation across multiple UBX daughterboards on USRP X Series motherboards enables users to explore MIMO and direction finding applications. The UBX 40 daughterboard works interchangeably with other USRP daughterboards and is compatible with the USRP X Series and N Series devices.
Overview
The UBX 40 daughterboard is a full-duplex wideband transceiver that covers frequencies from 10 MHz to 6 GHz with 40 MHz of instantaneous bandwidth. Coherent and phase-aligned operation across multiple UBX daughterboards on USRP X Series motherboards enables users to explore MIMO and direction finding applications. The UBX 40 daughterboard works interchangeably with other USRP daughterboards and is supported by the USRP Hardware Driver™ (UHD) software API for seamless integration into existing applications.
The flexible transceiver architecture features multiple reconfigurable RF signal paths to optimize performance across a wide frequency range. A down conversion stage in the transmitter path, and an up conversion stage in the receiver path, extends the tuning range of the main direct conversion stage to cover signals with a center frequency from 10 MHz to 500 MHz. The wide RF coverage of the UBX daughterboard is ideal for applications spanning all the most common bands of interest such as HF, VHF, cellular, radar, and Wi-Fi.
Features
- Wide frequency range: 10 MHz – 6 GHz
- Wide bandwidth: 40 MHz
- USRP compatibility: X Series and N Series
- RF shielding
- Full duplex operation with independent TX and RX frequencies
- Synthesizer synchronization for applications requiring coherent or phase-aligned operation, supported on USRP X Series motherboards
Block Diagram
RF Information
Additional Resources
Features
- 10 MHz to 6 GHz
- 40 MHz Bandwidth
- RF Shielding
- Phase Alignment Capable on X Series motherboards
Kit Contents
- UBX 40 Daughterboard
- Screws
Quotes and Sales
Email：sales@tekdf.com
Wechat：dftech_info
-
TwinRX 10-6000 MHz 2 Rx (80 MHz, X Series only)
784097-01 | TwinRX USRP Daughterboard (10 MHz – 6 GHz, 80 MHz BW, 2 RX) $ 5,260.00 USD
The TwinRX daughterboard for the USRP™ X Series software-defined radios is a dual-channel superheterodyne receiver that offers wide dynamic range and accurate phase synchronization with LO sharing for spectrum monitoring and direction-finding applications.
Overview
The TwinRX daughterboard for the USRP™ X Series software defined radios is a dual channel superheterodyne receiver that offers wide dynamic range and accurate phase synchronization for spectrum monitoring and direction finding applications. The RF signal chain features preampilifiers, preselectors, attenuators, and two mixer stages for excellent selectivity and spurious performance. The receiver is tunable from 10 MHz – 6 GHz and has 80 MHz of instantaneous bandwidth per channel, providing the versatility necessary to analyze a variety of signals in multiple bands of interest. Users can tune the two channels independently to simultaneously monitor uplink and downlink communication with a combined bandwidth of 160 MHz. The ability to share the LO between channels across multiple daughterboards enables the phase-aligned operation required to implement scalable multichannel phased arrays. The receiver is capable of fast frequency hopping to detect frequency agile emitters. The USRP Hardware Driver™ (UHD) software API automatically configures RF attenuation and preamplication to optimize dynamic range in favor of noise figure for faint signals, or IP3 for stronger signals. With the RF Network on Chip (RFNoC™) FPGA development framework, users can seamlessly off load compute intensive components of their application from host to FPGA for hardware acceleration and real-time performance.
Features
- Frequency range: 10 MHz – 6 GHz
- Bandwidth: 80 MHz per channel
- Channels: Two-stage superheterodyne, 2 RX, Independent tuning
- LO sharing
- USRP compatibility: X Series
- RF shielding
- Coherent and phased aligned operation
Block Diagram
RF Information
Additional Resources
Kit Contents
- TwinRX Daughterboard
- Screw Kit
- 2x LO Sharing Cables
- 2x Front Panel Cables
- 2x Front Panel Washers and Bolts
- Hardware Installation Guide
- Getting Started Guide
Quotes and Sales
Email：sales@tekdf.com
Wechat：dftech_info