您的购物车目前是空的！
标签： USRP
-
LFTX Daughterboard 0-30 MHz Tx
782753-01 | LFTX USRP Daughterboard (DC – 30 MHz) $ 167.00 USD
The LFTX utilizes high-speed operational amplifiers to provide clean operation of the USRP from DC to 30 MHz. The LFTX is ideal for direct operation in the HF band, or for users intending to use an external front end to up-convert to higher frequencies.
Overview
The LFTX daughterboard utilizes two high-speed operational amplifiers to allow transmission from 0-30 MHz. The LFTX is ideal for applications in the HF band, or for applications using an external front end to up-convert and amplify the intermediate signal. The outputs of the LFTX can be processed independently, or as a single I/Q pair. Example applications include HF communications, radios with external front ends and direct signal generation below 30 MHz
Quotes and Sales
Email：sales@tekdf.com
Wechat：dftech_info
-
LFRX Daughterboard 0-30 MHz Rx
782752-01 | LFRX USRP Daughterboard (DC – 30 MHz) $ 167.00 USD
The LFRX utilizes high-speed operational amplifier to provide receive coverage from DC to 30 MHz. The LFRX is ideal for users who intend to directly receive signals in the HF band using an external LNA, or use an external front end for down conversion.
Overview
The LFRX daughterboard is a low-cost daughterboard that provides direct access to the ADC inputs. The board can accept real-mode or quadrature signals from DC to 30 MHz. The LFRX is ideal for applications using an external front end providing relatively clean signals within operable bandwidth. High-speed opamps couple each RF input to a single channel of the USRP device’s ADC. The signals sampled by the ADC are manipulated in the FPGA, and can be processed as two real-mode signals, or a single I-Q pair.
The LFRX does not include a local oscillator or downconverter.
Quotes and Sales
Email：sales@tekdf.com
Wechat：dftech_info